AKU®-TEC PEEK Hollow rods or TUBES and RINGS

PEEK has a very high continuous service temperature, rigidity and hardness, uniquely high tensile and flexural fatigue strength, high heat resistance and very good chemical resistance.

It has very good dielectric properties up to +260°C and is resistant to
high-energy radiation.

PEEK is self-extinguishing in accordance with UL 94.

Very high dimensional stability
Very high strength and rigidity
Very high toughness (even in cold conditions)
Very high resistance to X-rays and infrared radiation
Very high temperature resistance
High hydrolysis resistance
Very high heat resistance
Low resistance to acetone
Relatively low notched impact strength
Very high creep resistance


Abstandshalter	not in stock, minimum quantity on request
Abstandshalter	Stock items ex works, subject to prior sale MQ on request


Abstandshalter
Abstandshalter

RINGS / TUBES


Material	Colour	OØ	IØ	Length
		mm	mm
PEEK	natural	124 - 570	98 - 530	150
PEEK	natural	483	445 - 455	140
PEEK	natural	525	495	100
PEEK	natural	540	510
PEEK	natural	620-1110	580 - 1070

HIGH RODS


Material	Colour	OØ x IØ	Length	Tol.				Weight
		mm	mm	OØmin	OØmax	IØmax	IØmin	kg/m
PEEK	natural	50 x 30	1000	+0,5	+2,2	-0,5	-2,2	1,930
PEEK	natural	70 x 50	1000	+0,6	+2,8	-0,6	-2,8	3,092
PEEK	natural	80 x 60	1000		+3,4		-3,4	3,513

All product designations with ®=reg. Product names are the property of the respective manufacturer

Polyetheretherketone

PEEK for short, is a high-performance thermoplastic that is used in various demanding industries due to its exceptional properties.

Properties of PEEK:

Temperature resistance:
PEEK is characterized by its remarkable temperature resistance. It can withstand temperatures of up to around 250 degrees Celsius without impairing its mechanical properties. This high heat resistance makes it suitable for applications in high-temperature environments.
Mechanical strength:
PEEK has high mechanical strength and rigidity. These properties, in combination with its temperature resistance, make it attractive for structural applications in the aerospace, automotive and other technical sectors.
Chemical resistance:
PEEK is resistant to a wide range of chemicals, including acids, bases, solvents and many aggressive substances. This chemical resistance extends the application possibilities of PEEK in corrosive environments.
Electrical insulation:
PEEK is used as an electrical insulator in the electrical and electronics industry. It is suitable for the manufacture of components in electrical devices where good insulation is required.
Biocompatibility:
PEEK is biocompatible, which means that it is compatible with biological tissue. This makes it suitable for use in medical technology for implants or surgical instruments.
Low weight:
Despite its strength and rigidity, PEEK is comparatively light. This is particularly relevant in applications where weight reduction is important, for example in the aerospace industry.
Workability:
PEEK can be processed by various methods, including injection molding, extrusion and compression molding. This versatility facilitates the manufacture of a wide variety of products.

Applications of PEEK:

PEEK is used in The products are used in various industries, including the aerospace, automotive, electrical and electronics, medical technology and oil and gas industries. Typical applications include high-temperature seals, bearings, implants, electrical insulators, wear parts and much more.

AHLBORN KUNSTSTOFFE

AKU®-TEC PEEK Hollow rods or TUBES and RINGS

Polyetheretherketone