Hot gas welder Welding unit 200

The insulated welding machine 200 is an excellent choice for plastic fitters and tank builders due to its light weight and ease of use.

The heat output of 1500 W at 230 V is infinitely adjustable from 20 to 700 °C and is kept constant electronically. Furthermore, an additional rotary knob enables individual regulation of the required air volume.

The appliance requires an external air supply for operation, such as a side channel blower, a fan or a compressor. We also offer a portable hand-held blower that can supply the required air both on construction sites and in the field thanks to its manageability.

On request, the welding machine can also be equipped with a threaded slip-on nozzle M 10. This slip-on nozzle enables the use of screw-on quick-welding nozzles, which are often used in plastic and container construction due to their high stability.

The 200 welding machine is available with a wide range of accessories for welding plastic sheets, pipes, parts and containers. For construction sites and outdoor use, the additional hand blower supplies the required air volume.

Voltage	230 V 50/60 Hz or 120 V 50/60 Hz
Heat output	1500 W 230 V or 1300 W 120 V
temperature	20-700 °C, infinitely adjustable
Regulation	Electronics
Air requirement	80-250 liters/min.

Further information on compressed air for welding plastics:

In the plastics processing industry, compressed air is often used for various welding techniques.
The compressed air can fulfill several functions, depending on the specific welding process being used.

Hot air welding:
In some plastic welding techniques, such as hot air welding, compressed air is used to direct heated air onto the plastic surfaces to be joined. The heated air melts the plastics and a solid weld seam is created after cooling.
Ultrasonic welding:
In this method, compressed air is used to operate an ultrasonic transducer that generates vibrations. These vibrations cause friction and heating of the plastic surfaces, which leads to their fusion and the creation of a weld seam.
Extrusion welding:
In some cases, compressed air is used to control the extrusion process. Molten plastic material is pressed out of a nozzle and shaped with compressed air to produce a welded joint.

Features:

Precise control:
Compressed air systems for welding plastics often require precise control to ensure the required pressure and optimum air composition.
Adaptability:
The compressed air source should be adaptable to different welding techniques and plastic materials.
Reliability:
A reliable compressed air system is crucial to ensure consistent results in the welding process.
Security functions:
Depending on the specific requirements of the welding application, safety functions such as pressure regulators and safety valves may be installed.

It is important to note that the exact type of compressed air source and its functions depend heavily on the specific welding technology and the requirements of the plastic welding process.

AHLBORN KUNSTSTOFFE

Hot gas welder Welding unit 200