Advantages:
Mobility: Independent of an external air supply – ideal for work in hard-to-reach areas or on boat hulls.
Easy handling: No external air hose required, which facilitates maneuverability.
Compact design: All components are integrated into one device, simplifying transport and storage.
Quick setup: No additional connections required – only a 230V power connection.
Disadvantages:
Higher weight: Usually heavier than models with external air supply due to the built-in blower motor.
Increased maintenance: The internal air generator may require additional maintenance.
Advantages:
Lower weight of the extruder: As the blower is not integrated, the handheld device is lighter and can be used with less fatigue.
Longer lifespan: The extruder itself is subject to less wear as the blower is operated separately.
Disadvantages:
Dependence on external air supply: An additional air source with dry and oil-free air is absolutely necessary (e.g., compressor or separate blower).
Limited mobility: Air hoses can restrict freedom of movement.
Greater space requirement: The external blower needs space in the workshop or on board.
More complex handling: Operation requires coordinated control of multiple components.
The choice between self-contained and external air supply depends largely on the specific requirements:
For mobile applications or limited space, welding extruders with self-contained air supply are more suitable as they are more flexible to use.
For stationary work with high performance requirements, models with external air supply offer better welding results and more ergonomic use.
Overview Matrix of the Extruders
Modell | Plattendicke s [mm] | 3,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 15,0 | 20,0 | 25,0 | 30,0 | 35,0 | 40,0 | 50,0 |
Kehlnaht a [mm] | 2,1 | 2,8 | 3,5 | 4,2 | 5,6 | 7,0 | 8,4 | 10,5 | 14,0 | 17,5 | 21,0 | 24,5 | 28 | 35 | |
Schweißleistung | |||||||||||||||
HSK 10 | 1,0 kg/h (PE Ø3 mm) | ||||||||||||||
HSK 18 | 1,8 kg/h (PE Ø4 mm) | ||||||||||||||
HSK 22 | 2,3 kg/h (PE Ø5 mm) | ||||||||||||||
HSK 26 | 2,5 kg/h (PE Ø4 mm) | ||||||||||||||
HSK 28 | 3,0 kg/h (PE Ø4 mm) | ||||||||||||||
HSK 40 | 4,0 kg/h (PE Ø5 mm) | ||||||||||||||
HSK 60 | 6,0 kg/h (PE Ø5 mm) |