AKU®-AMID PA 6.6 GF30 SHEETS extruded

Polyamide 6.6 GF30

stands for polyamide 6.6 with 30 percent glass fiber reinforcement. This glass fiber reinforcement significantly improves the mechanical properties of the polyamide and makes it suitable for specific applications. 

Properties of PA 6.6 GF30:

• High tensile strength:
  The glass fiber reinforcement significantly increases the tensile strength of PA 6.6 GF30, making it suitable for applications with high mechanical loads.

• High rigidity:
  The glass fiber reinforcement improves the stiffness of the material, making it suitable for structural applications in various industries.

• Improved temperature resistance:
  Thanks to the glass fiber reinforcement, PA 6.6 GF30 can withstand higher temperatures before its structural properties are impaired.

• Good chemical resistance:
  Like conventional PA 6.6, PA 6.6 GF30 also shows good resistance to many chemicals.

• Low water absorption:
  The glass fiber reinforcement reduces the water absorption of the material, resulting in lower moisture absorption.

• Good wear resistance:
  The combination of glass fiber reinforcement and polyamide properties gives PA 6.6 GF30 good abrasion resistance.

Applications of PA 6.6 GF30:

PA 6.6 GF30 is used in various industries for specific applications, including

• Automotive industry: Parts such as engine mounts, transmission housings, bumpers, and other structural components.

• Electrical industry: housings for electronic devices, plugs, switches and other components where strength and rigidity are required.

• Mechanical engineering: gears, bearings, bushings, brackets and other structural components.

• Building industry: Components that are exposed to high loads and weathering.

Due to its improved mechanical properties, PA 6.6 GF30 is a preferred choice in applications that require higher strength and rigidity.