logo transparent
logo transparent

AHLBORN KUNSTSTOFFE

Search
Contact us
Search

AKU®-FLON PTFE-virginal SOLID BARS or ROUND RODS

Polytetrafluoroethylene is very inert.
Even aggressive acids, such as aqua regis, cannot attack PTFE.
It is only unstable to very strong reducing agents such as solutions of alkali metals (e.g. sodium) in liquid ammonia or to very strong oxidizing agents such as elemental fluorine at higher temperatures. Operating temperature up to 280°C, frost-resistant down to -270°C.

PTFE has a very low coefficient of friction and slips on PTFE just as well as wet ice on wet ice.
In addition, static friction is just as high as sliding friction, so that the transition from standstill to movement takes place without jerking.

There are virtually no materials that stick to PTFE, as the surface tension is extremely low.
Polytetrafluoroethylene is difficult to wet and can only be bonded after special pre-treatment (etching).

AKU®-FLON PTFE 1550

  • Reduced deformation under load
  • Significantly improved elongation at break compared to normal PTFE
  • Improved weldability
  • Reduced friction and wear
  • Reduced deformation under load

Available on request:

Other PTFE compounds, e.g. filled with 15% graphite, 40% or 60% bronze, 50% stainless steel (Niro),
25% GF+MoS2, 25% GF+15% graphite, 25% ceramic.

All product designations with ®=reg. Product names are the property of the respective manufacturer

Vollstäbe Stäbe PVC PE PP PVDF POM Kunststoff
Solid rods Rods PTFE
Polytetrafluoroethylene

abbreviated to PTFE, is a synthetic fluoroplastic known for its unique chemical and physical properties. PTFE is produced by the polymerization of tetrafluoroethylene (TFE) and is best known under the brand name Teflon®.

Properties of PTFE:

  • High temperature resistance:
    PTFE is extremely heat-resistant and can withstand temperatures of up to 260°C without changing its structural properties. This property makes it suitable for applications in extreme temperature ranges.

  • Excellent chemical resistance:
    PTFE shows exceptional resistance to a wide range of chemicals, acids and bases. It is inert to most chemical substances and is therefore often used in demanding chemical environments.

  • Lubricity:
    The surface of PTFE is extremely smooth, which results in excellent gliding properties. This makes it suitable for applications in mechanical engineering and as a sliding material in bearings and seals.

  • Low friction:
    PTFE has low friction, which makes it interesting for applications in the automotive industry, food processing and other areas.

  • Electrical insulation:
    PTFE is an excellent insulator and is therefore frequently used in the electrical industry for the manufacture of cables, connectors and insulators.

  • Good weather resistance:
    PTFE is resistant to UV radiation and weathering, which makes it suitable for outdoor use.

Applications of PTFE:

PTFE is used in a variety of applications, including:

  • Chemical industry: valves, pipelines, seals and containers due to its chemical resistance.

  • Electrical and electronics industry: cable insulation, connectors and other electrical components.

  • Food processing: non-stick coatings for cookware, seals and conveyor belts.

  • Medical technology: implants, tubes and seals due to its biocompatibility.

  • Automotive industry: Seals, bearings, slideways and components with high temperature resistance.

PTFE is widely used in various technical applications due to its unique combination of properties.

Ahlborn Kunststoffe – Duty to provide information pursuant to § 5 para. 1 E-Commerce Act

All rights reserved AKU© 2024